|Crimping Force ||120KN |
|Crimps per charge||120 times (Cu 150mm2 )|
|Crimping cycle||6-18s (depends on the size of cable)|
|Battery capacity||3.0 Ah|
|Crimping Dies.||16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300, 400mm2|
|Sealing ring of cylinder||1set|
|Sealing ring safety valve||1set|
C Type Battery Hydraulic Press Tool with Battery Power,range of 16-400mm2
Micro computer control system-automatically detect the pressure when it is crimping, with double safety protect.
The tool equipped with a double piston pump which characterized by a fast approach towards the connecting material and transfer to high pressure automatically by slow crimping.
If a deviation from the set operation pressure or low battery charges is identified, an acoustic signal sounds and a red display flashes.
One key control-press the trigger to start working, half loosing the trigger means stop forcing pressure, loosing fully means piston return to the original position.
A Temperature sensor makes the tool stop working automatically when the temperature over 60℃ under long time working, the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal.