Hydraulic Tools To Make Your Job Easier!
Battery Cable Cutter BZ-85 for Φ85mm Cu/Al Cable And Armoured Cable
You are here: Home » Products » Wire Installation Tools » Battery Cable Tools » Battery Cable Cutter BZ-85 for Φ85mm Cu/Al Cable And Armoured Cable

Battery Cable Cutter BZ-85 for Φ85mm Cu/Al Cable And Armoured Cable

Share to:
sharethis sharing button
A manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp. The unit is equipped with a special brake when stops the forward motion of the piston & die when the trigger is released.
  • BZ-85

  • iGeelee

Availability:
Quantity:

 Battery Cable Cutter BZ-85 for Φ85mm Cu/Al Cable And Armoured Cable

                                                                

Cutting Force 60KN  
Stroke    86mm    
Cutting range
Φ85mm (Cu/Al cable and armored cable)    
Cutting cycle    70 times    
Battery voltage
18V     
Battery capacity   3.0 Ah   
Charging time     2hours 
Package    Steel case  
Accessories
Blade   1pc    
Battery    2pcs   
Charger    1pcs  
Sealing ring of cylinder  1set    
Sealing ring safety valve  1set   

 

Battery Powered Cable cutter BZ&EZ-85 Series cutting tools with battery powered for cutting Cu/Al and armoured cable, which charging time for 2hours

The hydraulic unit incorporates an automatic retraction which returns the piston into its starting position when the maximum operating pressure is reached. 

A manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp. The unit is equipped with a special brake when stops the forward motion of the piston & die when the trigger is released.

The unit is equipped with a double piston pump which is characterized by a rapid approach of the dies forwards the connector and a slow crimping motion.

The crimping head can be smoothly turned by 350° around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.

Li-ion batteries do neither have a memory effect nor self discharge. Even after long periods of no operation, the tool is always ready to operate. In addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles compare to NiMH batteries.

A Temperature sensor makes the tool stop working automatically when the temperature over 60℃ under long time working, the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal.


Previous: 
Next: 

Related Products