Battery Pex Crimping Tools EZ-1632,crimping Force for 60KN And Clamping Cycle for 3-6s
|Crimping/ Charges||320 times|
|Battery capacity||3.0 Ah|
|Crimping die for SV type||Φ16mm, Φ20mm, Φ25mm|
|Crimping die for H type||Φ16mm, Φ20mm, Φ25mm, Φ32mm|
|Crimping die for TH type||Φ16mm, Φ20mm, Φ26mm, Φ32mm|
Note: The accessories type used at optional.
BZ-1632 and EZ-1632 Pex Crimping Tools,crimping force for 60KN and clamping cycle for 3-6s
The hydraulic unit incorporates an automatic retraction which returns the piston into its starting position when the maximum operating pressure is reached.
A manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp. The unit is equipped with a special brake when stops the forward motion of the piston & die when the trigger is released.
The unit is equipped with a double piston pump which is characterized by a rapid approach of the dies forwards the connector and a slow crimping motion.
The crimping head can be smoothly turned by 350° around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.
Li-ion batteries do neither have a memory effect nor self discharge. Even after long periods of no operation, the tool is always ready to operate. In addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles compare to NiMH batteries.
A Temperature sensor makes the tool stop working automatically when the temperature over 60℃ under long time working, the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal.