Hydraulic Tools To Make Your Job Easier!
  • Product Name
  • Product Keyword
  • Product Model
  • Product Summary
  • Product Description
  • Multi Field Search
Battery Powered Hole Punch Tools EZ-12 for Mild Metal Sheet
You are here: Home » Products » Busbar Processing Machine » Hole Punch Tools » Battery Powered Hole Punch Tools EZ-12 for Mild Metal Sheet

Battery Powered Hole Punch Tools EZ-12 for Mild Metal Sheet

Share to:

Dies of 22.50mm 28.30mm 34.60mm 43.20mm 49.60mm 61.50mm

  • EZ-12
  • iGeelee
Quantity:

 Battery Powered Hole Punch Tools EZ-12 for Mild Metal Sheet                                                                                                        

Punching Force   

120KN

Stroke     27mm
Punch/ charge    

180 times

Battery voltage     

18V   

Battery capacity

3.0 Ah, Li-ion

Maximum Round Punch Size(in 3.5mm mild steel)

61.5mm dia    

Charging time

2hours    

Package     

Plastic Box    

Accessories   
DESCRIPTION   

HOLE SIZE (TYPE C)

       

         

     
Φ(INCH)     Φmm    
1/2"Conduit Punch&Die     7/8"    .88522.50   
3/4"Conduit Punch & Die         

         

     
1.115   28.30    
1"Conduit Punch & Die          

         

     
1.362 34.60    
1-1/4"Conduit Punch & Die
     
       

         

     
1.701
     
43.20     
1-1/2"Conduit Punch & Die
     
1-15/16
     
1.951
     
49.60
     
2"Conduit Punch & Die
     
2-3/8
     
2.146
     
61.50
     
7/16"X3/4" Draw Stud   1 pc
3/4X3/4" Draw Stud
1 pc 
Spencer   1 pc 
Sealing Kit  1 pc  
Battery 2pcs  
Charger   1pcs    
Sealing ring of cylinder   1set
Sealing ring safety valve    1set    

 

BZ&EZ Battery Hole Punch Tool for mild metal sheet of different hole size, suit to working in narrow space

 The hydraulic unit incorporates an automatic retraction which returns the piston into its starting position when the maximum operating pressure is reached.

 A manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp. The unit is equipped with a special brake when stops the forward motion of the piston & die when the trigger is released.

 The unit is equipped with a double piston pump which is characterized by a rapid approach of the dies forwards the connector and a slow crimping motion.

 The crimping head can be smoothly turned by 350° around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.

 Li-ion batteries do neither have a memory effect nor self discharge. Even after long periods of no operation, the tool is always ready to operate. In addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles compare to NiMH batteries.

 A Temperature sensor makes the tool stop working automatically when the temperature over 60℃ under long time working, the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal.


Related Products