IG-71500 Hydraulic A/C Hose Crimper Crimping Tool Kit the same as mastercool brand crimping tool, Conditioner Automotive Repair tool for crimping Barbed And Beaded Hose Fittings
|71500 - 001||Hydra - flare assembly|
|71500 - 8||Die Set - #8 (13/32")|
|M71500 - 10||Die Set - #10 (1/2")|
|M71500 - 12||Die Set - #12 (5/8")|
|71500 - 6SRB||Die Set - #6 (5/16" Reduced Barrier)|
|71500 - 8SRB||Die Set - #8 Reduced Barrier (13/32)|
|71500 - 10SRB||Die Set - #10 (1/2" Reduced Barrier)|
|71500 - 12SRB||Die Set - #12 (5/8" Reduced Barrier)|
|71500 - PB||Die Set Plastic Box|
How to use ?
Very easy for using :
1.Remove pin and loose the handle till you can "Open" top yoke.
2.select correct die set (refer to back page for description )
3.insert the die into joke.
4.position fitting and hose in the crimper and close the yoke.
5.insert pin securely .
6.Turn Body of tool clock wise until dies are snug against hose fitting .
7.Turn hydraulic valve to "closed "position .
8.Pump handle to crimp fitting onto hose .continue pumping until handle comes to a stop .
9.Once crimp is complete,turn hydraulic valve to OPEN position .
Hydra-Krimp for Barbed and Beaded Hose Fittings
The new Patent pending "HYDRA - KRIMP" makes crimping barbed and beaded fittings as easy as 1 - 2 - 3!
The lightweight hand-held hydraulic press is very portable and ideal for shop and field applications.
The Hydra- Krimp can be used on both beaded and barbed hose fittings.
The kit comes with a complete set of dies covering hose sizes #8, #10, #12 and reduced barrier #6, #8, #10 and #12.
The dies snap quickly into the press fixture requiring no pins or screws. Kit comes in custom molded case and includes