Availability: | |
---|---|
Quantity: | |
Technical Parameters: | |
Length | 116*75*382 |
Weight of tool | 2.90kg |
Rated power | 52Mpa |
Max.output | 50KN |
Cutting/Charge | 300times |
Mild iron rod | 13mm |
Rebar | 14mm |
Copper stranded wire | 20mm |
Aluminum wire | 20mm |
Armored cable | 20mm |
ASCR | 21mm |
Steel wire | 20mm |
Voltage of battery | 18V DC Li-ion |
Capacity | 3Ah |
Voltage | 100-240V AC |
Charging time | 2hours |
Accessories | |
Battery | 2pcs |
Charger | 1pcs |
Sealing ring of cylinder | 1set |
Sealing ring of safety valve | 1set |
Prohibit to cut chilled steel and piano wire |
EZ-20 Mini Battery Cable Cutter, Li-ion batteries do neither have a memory effect nor self discharge.
Features
Micro computer control system-automatically detect the pressure when it is crimping, with double safety protect.
The hydraulic unit incorporates an automatic retraction which returns the piston into its starting position when the maximum operation pressure is reached.
The tool equipped with a double piston pump which characterized by a fast approach towards the connecting material and transfer to high pressure automatically by slow crimping.
The crimping head can be smoothly turned by 350° around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.
If a deviation from the set operation pressure or low battery charges is identified, an acoustic signal sounds and a red display flashes.
All tools can be controlled by one trigger. This results in an easy handling and a better grip compared to a two button operation.
Li-ion batteries do neither have a memory effect nor self discharge. Even after long periods of no operation, the tool is always ready to operate. In addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles compare to NiMH batteries.
A Temperature sensor makes the tool stop working automatically when the temperature over 60℃ under long time working, the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal.
USD connect to memory cutting times.
LED for battery charge, a red display flashed shows if a deviation is identified
A manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp
Technical Parameters: | |
Length | 116*75*382 |
Weight of tool | 2.90kg |
Rated power | 52Mpa |
Max.output | 50KN |
Cutting/Charge | 300times |
Mild iron rod | 13mm |
Rebar | 14mm |
Copper stranded wire | 20mm |
Aluminum wire | 20mm |
Armored cable | 20mm |
ASCR | 21mm |
Steel wire | 20mm |
Voltage of battery | 18V DC Li-ion |
Capacity | 3Ah |
Voltage | 100-240V AC |
Charging time | 2hours |
Accessories | |
Battery | 2pcs |
Charger | 1pcs |
Sealing ring of cylinder | 1set |
Sealing ring of safety valve | 1set |
Prohibit to cut chilled steel and piano wire |
EZ-20 Mini Battery Cable Cutter, Li-ion batteries do neither have a memory effect nor self discharge.
Features
Micro computer control system-automatically detect the pressure when it is crimping, with double safety protect.
The hydraulic unit incorporates an automatic retraction which returns the piston into its starting position when the maximum operation pressure is reached.
The tool equipped with a double piston pump which characterized by a fast approach towards the connecting material and transfer to high pressure automatically by slow crimping.
The crimping head can be smoothly turned by 350° around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.
If a deviation from the set operation pressure or low battery charges is identified, an acoustic signal sounds and a red display flashes.
All tools can be controlled by one trigger. This results in an easy handling and a better grip compared to a two button operation.
Li-ion batteries do neither have a memory effect nor self discharge. Even after long periods of no operation, the tool is always ready to operate. In addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles compare to NiMH batteries.
A Temperature sensor makes the tool stop working automatically when the temperature over 60℃ under long time working, the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal.
USD connect to memory cutting times.
LED for battery charge, a red display flashed shows if a deviation is identified
A manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp
| No.866 Nanpu Road, Jingbei New District, Nanjing, China |
| +86 025 58600019 |
|