Availability: | |
---|---|
Quantity: | |
Crimping Force | 50KN |
Stroke | 12mm |
Crimps per charge | 170 times (Cu 150mm2 ) |
Crimping cycle | 3-6s (depends on the size of cable) |
Battery voltage | 18V |
Battery capacity | 3.0Ah |
Charging time | 2hours |
Package | Steel case |
Accessories | |
Crimping Dies. | 16, 25, 35, 50, 70, 95, 120, 150, 185, 240mm2 |
Battery | 2pcs |
Charger | 1pcs |
Sealing ring of cylinder | 1set |
Sealing ring safety valve | 1set |
Battey Cable Compression Tool EZ-240 Mini Crimping Tool for cable of 16,25,35,50,70,95,120,150,185,240mm2
Micro computer control system-automatically detect the pressure when it is crimping, with double safety protect.
Pressure released automatically Function-the tool stop forcing the pressing and release 90% pressure when the pressure reached maximum.
The tool equipped with a double piston pump which characterized by a fast approach towards the connecting material and transfer to high pressure automatically by slow crimping.
The crimping head can be smoothly turned by 350° around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.
If a deviation from the set operation pressure or low battery charges is identified, an acoustic signal sounds and a red display flashes.
One key control-press the trigger to start working, half loosing the trigger means stop forcing pressure, loosing fully means piston return to the original position.
Li-ion batteries do neither have a memory effect nor self discharge. Even after long periods of no operation, the tool is always ready to operate. In addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles compare to NiMH batteries.
A Temperature sensor makes the tool stop working automatically when the temperature over 60℃ under long time working, the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal.
LED for battery charge, a red display flashes shows if a deviation is identified
A manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp
Crimping Force | 50KN |
Stroke | 12mm |
Crimps per charge | 170 times (Cu 150mm2 ) |
Crimping cycle | 3-6s (depends on the size of cable) |
Battery voltage | 18V |
Battery capacity | 3.0Ah |
Charging time | 2hours |
Package | Steel case |
Accessories | |
Crimping Dies. | 16, 25, 35, 50, 70, 95, 120, 150, 185, 240mm2 |
Battery | 2pcs |
Charger | 1pcs |
Sealing ring of cylinder | 1set |
Sealing ring safety valve | 1set |
Battey Cable Compression Tool EZ-240 Mini Crimping Tool for cable of 16,25,35,50,70,95,120,150,185,240mm2
Micro computer control system-automatically detect the pressure when it is crimping, with double safety protect.
Pressure released automatically Function-the tool stop forcing the pressing and release 90% pressure when the pressure reached maximum.
The tool equipped with a double piston pump which characterized by a fast approach towards the connecting material and transfer to high pressure automatically by slow crimping.
The crimping head can be smoothly turned by 350° around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.
If a deviation from the set operation pressure or low battery charges is identified, an acoustic signal sounds and a red display flashes.
One key control-press the trigger to start working, half loosing the trigger means stop forcing pressure, loosing fully means piston return to the original position.
Li-ion batteries do neither have a memory effect nor self discharge. Even after long periods of no operation, the tool is always ready to operate. In addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles compare to NiMH batteries.
A Temperature sensor makes the tool stop working automatically when the temperature over 60℃ under long time working, the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal.
LED for battery charge, a red display flashes shows if a deviation is identified
A manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp
| No.866 Nanpu Road, Jingbei New District, Nanjing, China |
| +86 025 58600019 |
|