Battery Hydraulic Power Crimping Tool for Cable Lug Up To 300mm2,head Rotates 360° BZ-300

Battery Hydraulic Power Crimping Tool for Cable Lug Up To 300mm2,head Rotates 360° BZ-300 

                                                                   

 

BZ-300 Hydraulic Power Crimping tool crimp cable lug range of 16,25,35,50,70,95,120,150,185,240,300mm2,head rotates 360°

Hydraulic Power Crimping tool with crimping force of 60KN for 16-300mm2 cable use

The hydraulic unit incorporates an automatic retraction which returns the piston into its starting position when the maximum operating pressure is reached.

A manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp. The unit is equipped with a special brake when stops the forward motion of the piston & die when the trigger is released. 

The unit is equipped with a double piston pump which is characterized by a rapid approach of the dies forwards the connector and a slow crimping motion.

The crimping head can be smoothly turned by 350° around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.

Li-ion batteries do neither have a memory effect nor self discharge. Even after long periods of no operation, the tool is always ready to operate. In addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles compare to NiMH batteries.

A Temperature sensor makes the tool stop working automatically when the temperature over 60℃ under long time working, the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal.