Battery Powered Hole Punch Tools ED-12 for Mild Metal Sheet
Technical Data Sheet
Battery Powered Hole Punch Tools ED-12 for Mild Metal Sheet
Punching Force | 120KN | |||
| Stroke | 27mm | |||
| Punch/ charge | 180 times | |||
| Battery voltage | 18V | |||
Battery capacity | 3.0 Ah, Li-ion | |||
| Maximum Round Punch Size(in 3.5mm mild steel) | 61.5mm dia | |||
| Charging time | 2hours | |||
| Package | Plastic Box | |||
| Accessories | ||||
| DESCRIPTION | HOLE SIZE (TYPE C) | |||
|
| Φ(INCH) | Φmm | ||
| 1/2"Conduit Punch&Die | 7/8" | .885 | 22.50 | |
| 3/4"Conduit Punch & Die |
| 1.115 | 28.30 | |
| 1"Conduit Punch & Die |
| 1.362 | 34.60 | |
| 1-1/4"Conduit Punch & Die |
| 1.701 | 43.20 | |
| 1-1/2"Conduit Punch & Die | 1-15/16 | 1.951 | 49.60 | |
| 2"Conduit Punch & Die | 2-3/8 | 2.146 | 61.50 | |
| 7/16"X3/4" Draw Stud | 1 pc | |||
| 3/4X3/4" Draw Stud | 1 pc | |||
| Spencer | 1 pc | |||
| Sealing Kit | 1 pc | |||
| Battery | 2pcs | |||
| Charger | 1pcs | |||
| Sealing ring of cylinder | 1set | |||
| Sealing ring safety valve | 1set | |||
BZ&EZ Battery Hole Punch Tool for mild metal sheet of different hole size, suit to working in narrow space
The hydraulic unit incorporates an automatic retraction which returns the piston into its starting position when the maximum operating pressure is reached.
A manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp. The unit is equipped with a special brake when stops the forward motion of the piston & die when the trigger is released.
The unit is equipped with a double piston pump which is characterized by a rapid approach of the dies forwards the connector and a slow crimping motion.
The crimping head can be smoothly turned by 350° around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.
Li-ion batteries do neither have a memory effect nor self discharge. Even after long periods of no operation, the tool is always ready to operate. In addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles compare to NiMH batteries.
A Temperature sensor makes the tool stop working automatically when the temperature over 60℃ under long time working, the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal.