Electric Hydraulic Pipe Bender Machine DWG Series Suit for for Thin And Thick Wall Conduit Tube And Carbon Steel Pipe
Technical Data Sheet
Electric Hydraulic Pipe Bender Machine DWG Series suit for for thin and thick wall conduit tube and carbon steel pipe
Item No. | Output | Stroke | Bending range | Outside dia. (mm) | Thickness (mm) | Weight | Accessories |
DWG-1 | 10T | 170mm | 1/4”- 1” | Φ13mm-Φ34 | 1- 3.5 | 20kg | 1/4”, 5/16”, 3/8”, 1/2”, 3/4”, 1” |
DWG-2 | 16T | 240mm | 1/2”- 2” | Φ22mm-Φ60 | 2.75- 4.5 | 37.5kg | 1/2”, 3/4”, 1”, 1 1/4”, 1 1/2”, 2” |
DWG-3 | 18T | 320mm | 1/2”- 3” | Φ22mm-Φ89 | 2.75- 4.5 | 79.5kg | 1/2”, 3/4”, 1”, 1 1/4”, 1 1/2”, 2”, 2 1/2”,3” |
DWG-4 | 20T | 415mm | 1/2”- 4” | Φ22mm-Φ108 | 2.75- 6 | 126.5kg | 1/2”, 3/4”, 1”, 1 1/4”, 1 1/2”, 2”, 2 1/2”, 3”, 4” |
Electric Hydraulic Pipe Bender Features
1 It is suit for common water pipe, wire pipe, thick-wall conduit tube,bending the angle with 90º.
2 1/2”-2” can be shaped 90º one time, for 2 1/2”-4”, pipe must be moved and bended for five times to the demanded radian.
3. It come with electric pump.