Electro Cable Cutting Tools BZ-45 with Battery Powered for Cutting Cu/Al And Armoured Cable
Technical Data Sheet
Electro Cable Cutting Tools BZ-45 with Battery Powered for Cutting Cu/Al And Armoured Cable
| Cutting Force | 60KN |
| Stroke | 50mm |
| Cutting range | Φ45mm (Cu/Al cable and armoured cable) |
| Cutting cycle | 70 times |
| Battery voltage | 18V |
| Battery capacity | 3.0 Ah |
| Charging time | 2hours |
| Package | Plastic case |
| Accessories | |
| Blade | 1pc |
| Battery | 2pcs |
| Charger | 1pc |
| Sealing ring of cylinder | 1set |
| Sealing ring safety valve | 1set |
BZ Series Electro cable cutting tools with battery powered for cutting Cu/Al and armoured cable, which charging time for 2hours
The hydraulic unit incorporates an automatic retraction which returns the piston into its starting position when the maximum operating pressure is reached.
A manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp. The unit is equipped with a special brake when stops the forward motion of the piston & die when the trigger is released.
The unit is equipped with a double piston pump which is characterized by a rapid approach of the dies forwards the connector and a slow crimping motion.
The crimping head can be smoothly turned by 350° around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.
Li-ion batteries do neither have a memory effect nor self discharge. Even after long periods of no operation, the tool is always ready to operate. In addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles compare to NiMH batteries.
A Temperature sensor makes the tool stop working automatically when the temperature over 60℃ under long time working, the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal.