Electro Pipe Fitting Tool BZ-1632 with Li-ion Battery, for Crimping Range of 16-32mm
Technical Data Sheet
Electro Pipe Fitting Tool BZ-1632 with crimping range of 16-32mm
| Crimping force | 60KN |
| Stroke | 17mm |
| Crimping/ Charges | 320 times |
| Cutting cycle | 3s-6s |
| Battery voltage | 18V |
| Battery capacity | 3.0 Ah |
| Charging time | 2hours |
| Package | Plastic case |
| Crimping die for SV type | Φ16mm, Φ20mm, Φ25mm |
| Crimping die for H type | Φ16mm, Φ20mm, Φ25mm, Φ32mm |
| Crimping die for TH type | Φ16mm, Φ20mm, Φ26mm, Φ32mm |
Note: The accessories type used at optional.
Product Description
Electro Pipe Fitting Tool BZ-1632 and EZ-1632 Pex Crimping Tools,crimping force for 60KN and clamping cycle for 3-6s
The hydraulic unit incorporates an automatic retraction which returns the piston into its starting position when the maximum operating pressure is reached.
A manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp. The unit is equipped with a special brake when stops the forward motion of the piston & die when the trigger is released.
The unit is equipped with a double piston pump which is characterized by a rapid approach of the dies forwards the connector and a slow crimping motion.
The crimping head can be smoothly turned by 350° around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.
Li-ion batteries do neither have a memory effect nor self discharge. Even after long periods of no operation, the tool is always ready to operate. In addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles compare to NiMH batteries.
A Temperature sensor makes the tool stop working automatically when the temperature over 60℃ under long time working, the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal.