Hydraulic Pipe Bending Tool with Pump CPB-P Series Come with Manual Pump Range From 1" To 4"
Technical Data Sheet
Hydraulic Pipe Bending Tool with pump CPB-P Series come with manual pump range from 1" to 4"
| Item No. | Output | Stroke | Bending range | Outside dia. (mm) | Thickness (mm) | Weight | Accessories |
| CPB-1P | 10T | 170mm | 1/4”- 1” | Φ13mm-Φ34 | 1- 3.5 | 20kg | 1/4”, 5/16”, 3/8”, 1/2”, 3/4”, 1” |
| CPB-2P | 16T | 240mm | 1/2”- 2” | Φ22mm-Φ60 | 2.75- 4.5 | 45.5kg | 1/2”, 3/4”, 1”, 1 1/4”,1 1/2”, 2” |
| CPB-3P | 18T | 320mm | 1/2”- 3” | Φ22mm-Φ89 | 2.75- 4.5 | 79.5kg | 1/2”, 3/4”, 1”, 1 1/4”,1 1/2”, 2”, 2 1/2”,3” |
| CPB-4P | 20T | 415mm | 1/2”- 6” | Φ22mm-Φ108 | 2.75- 6 | 126.5kg | 1/2”, 3/4”, 1”, 1 1/4”, 1 1/2”, 2”, 2 1/2”, 3”, 4” |
Hydraulic Pipe Bender Features
1 It is suit for common water pipe, wire pipe, thick-wall conduit tube,
bending the angle with 90º.
2 1/2”-2” can be shaped 90º one time, for 2 1/2”-4”, pipe must be
moved and bended for five times to the demanded radian.
3. It come with manual pump.