Hydraulic Wire Crimper Tool EP-510 for Cu 50-400mm2,crimping Force of 126KN for Compression Lugs To Copper,aluminum Conductors
Technical Data Sheet
Hydraulic Wire Crimping Tool EP-510(Safety valve inside）
| Crimping Range | Cu 16-400mm2 |
| Crimping Force | 130KN |
| Crimping Type | hexagon crimping |
| Stroke | 32mm |
| Oil capacity | 145CC |
| Weight | approx.7.2kg |
| Package | Plastic case |
| Standard Accessories | 16,25,35,50,70,95,120,150,185,240,300, 400mm2 |
Hydraulic Wire Crimping Tool from 16-400mm2,is a professional tool for crimping copper and aluminum lugs with different types, range Cu 50-400mm2, Crimping dies: 50,70,95,120,150,185,240,300,400mm2
1 Design to accommodate hexagonal, dies of the Compression tool for applying compression fittings too copper, aluminum conductors.
2 Two stage pumping action for rapid ram advance to the connector hold position with minimum pumping action.
3 Automatic retraction when the pressure when the pressure of the compression tool reaches 700kg/cm2(12T) reached.
4 The glass fiber operation insulates the stick, can bear the electric voltage 200KV, keeping on the minute.
5 The type of the hydraulic compression tool with 180 degree rotatable head.
6 The pressure outside the body adjusts to press the valve.