71500 Hydraulic Hose Crimper Hose Crimping Tool Kit Automotive Hydra Krimp for car repair

Description:

The light weight hand-held hydraulic press is very portable and ideal for shop and field applications.

The Hydra- Krimp can be used on both beaded and barbed hose fittings. The kit comes with a complete set of dies covering hose sizes #8, #10, #12 and reduced barrier #6, #8, #10 and #12.

The dies snap quickly into the press fixture requiring no pins or screws. Kit comes in custom molded case.

Hydra-Krimp Hose Crimper dies snap quickly into the press fixture, requiring no pins or screws.  Kit comes in custom molded case.

Brand New In Original Box, 2 Year Manufacturer Warranty, You can contact us if you have any questions or need more information about this item.

Very easy for using :

1.Remove pin and loose the handle till you can "Open" top yoke

2.Select correct die set (refer to back page for description )

3.Insert the die into joke

4.Position fitting and hose in the crimper and close the yoke.

5.insert pin securely

6.Turn Body of tool clock wise until dies are snug against hose  fittings.

7.Turn hydraulic valve to "closed "position

8. Pump handle to crimp fitting onto hose .continue pumping until handle comes to a stop

9. Once crimp is complete,turn hydraulic valve to OPEN position

Details:

Using the 71500 Crimp Machine, Crimping barbed and beaded fittings as easy as 1 - 2 - 3 !  The lightweight hand-held hydraulic press is very portable and ideal for shop and field applications.

Pre-operation set-up

Open the relief valve to fully recess the piston

Rotate the yoke fully counter clockwise to bottom out the adapter seat

READY TＯ GO!

WARNING: Do NOT actuate the piston without having a hose and fitting in plave to crimp. This could cause damage to the tool. BE CAREFUL not to place hands near any pinch point while using the tool !

Feature

The lightweight hand-held hydraulic press is very portable and ideal for shop and field applications

The Hydra- Krimp can be used on both beaded and barbed hose fittings

The kit comes with a complete set of dies covering hose sizes #8, #10, #12 and reduced Barrier #6, #8, #10 and #12

The dies snap quickly into the press fixture requiring no pins or screws. Kit comes in custom molded

Specifications

Condition: NEW

Brand: iGeelee

Model: 71500

Type: Hose Crimper Tool

Quantity: 1 piece

Weight: 17.6LBS 8KG

Material: Aluminum Alloy

Product Size: 18*15* 9 in /46*38*23 cm

Package Size: 46.5*37.5* 23 cm

Warranty: 2 Years

Package Content

71500 - 001A Hydra - Krimp Pump

71500-001B Hydra-Krimp Yoke

71500-001C

71500 - 6 Die Set - #6 (5/16”)

Die Set - #8 (13/32”) (Reduced Barrier)

71500 - 8 Die Set - #8 (13/32”)

71500 - 10 Die Set - #10 (1/2”)

71500 - 12 Die Set - #12 (5/8”)

71500 - 6SRB Die Set - #6 (5/16”) (Reduced Barrier)

71500 - 10SRB Die Set - #10 (1/2”) (Reduced Barrier)

71500 - 12SRB Die Set - #12 (5/8”) (Reduced Barrier)

71500-  PB Custom Molded Box