Hydraulic Tools To Make Your Job Easier!
  • Product Name
  • Product Keyword
  • Product Model
  • Product Summary
  • Product Description
  • Multi Field Search
Electro Pipe Fitting Tool BZ-1632 with Li-ion Battery, for Crimping Range of 16-32mm
You are here: Home » Products » Pipe Installation Tools » Battery Pipe Tools » Electro Pipe Fitting Tool BZ-1632 with Li-ion Battery, for Crimping Range of 16-32mm

Electro Pipe Fitting Tool BZ-1632 with Li-ion Battery, for Crimping Range of 16-32mm

Share to:

Crimping force 60KN Crimping die for TH type Φ16mm, Φ20mm, Φ26mm, Φ32mm

  • BZ-1632
  • iGeelee
Quantity:

Electro Pipe Fitting Tool BZ-1632 with crimping range of 16-32mm                  

Crimping force      60KN     
Stroke      17mm     
Crimping/ Charges      320 times     
Cutting cycle        3s-6s     
Battery voltage      18V     
Battery capacity      3.0 Ah     
Charging time      2hours     
Package      Plastic case     
Crimping die for SV type      Φ16mm, Φ20mm, Φ25mm     
Crimping die for H type
     
Φ16mm, Φ20mm, Φ25mm, Φ32mm
     
Crimping die for TH type
     
Φ16mm, Φ20mm, Φ26mm, Φ32mm
     

 Note: The accessories type used at optional.

JAWS EZ BZ 1632-1550.jpg

Electro Pipe Fitting Tool BZ-1632 and EZ-1632 Pex Crimping Tools,crimping force for 60KN and clamping cycle for 3-6s

 The hydraulic unit incorporates an automatic retraction which returns the piston into its starting position when the maximum operating pressure is reached.

 A manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp. The unit is equipped with a special brake when stops the forward motion of the piston & die when the trigger is released.

 The unit is equipped with a double piston pump which is characterized by a rapid approach of the dies forwards the connector and a slow crimping motion.

 The crimping head can be smoothly turned by 350° around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.

 Li-ion batteries do neither have a memory effect nor self discharge. Even after long periods of no operation, the tool is always ready to operate. In addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles compare to NiMH batteries.

 A Temperature sensor makes the tool stop working automatically when the temperature over 60℃ under long time working, the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal.