Hydraulic Tools To Make Your Job Easier!
Battery Cable Cutter EZ-85 for Φ85mm Cu/Al Cable And Armoured Cable
You are here: Home » Products » Wire Installation Tools » Battery Cable Tools » Battery Cable Cutter EZ-85 for Φ85mm Cu/Al Cable And Armoured Cable
Battery Cable Cutter EZ-85 for Φ85mm Cu/Al Cable And Armoured Cable Battery Cable Cutter EZ-85 for Φ85mm Cu/Al Cable And Armoured Cable
Battery Cable Cutter EZ-85 for Φ85mm Cu/Al Cable And Armoured Cable Battery Cable Cutter EZ-85 for Φ85mm Cu/Al Cable And Armoured Cable
Battery Cable Cutter EZ-85 for Φ85mm Cu/Al Cable And Armoured Cable Battery Cable Cutter EZ-85 for Φ85mm Cu/Al Cable And Armoured Cable
Battery Cable Cutter EZ-85 for Φ85mm Cu/Al Cable And Armoured Cable Battery Cable Cutter EZ-85 for Φ85mm Cu/Al Cable And Armoured Cable

loading

Battery Cable Cutter EZ-85 for Φ85mm Cu/Al Cable And Armoured Cable

Share to:
sharethis sharing button
A Temperature sensor makes the tool stop working automatically when the temperature over 60℃ under long time working, the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal.
  • EZ-85

  • iGeelee

Availability:
Quantity:

 Battery Cable Cutter EZ-85 for Φ85mm Cu/Al Cable And Armoured Cable   

                                                                      

Cutting Force   60KN    
Stroke   86mm   
Cutting range   Φ85mm (Cu/Al cable and armoured cable)     
Cutting cycle  70 times   
Battery voltage   18V     
Battery capacity    3.0 Ah    
Charging time    2hours   
Package  Steel case     
Accessories 
Blade  1pc    
Battery    2pcs     
Charger     1pcs    
Sealing ring of cylinder
1set    
Sealing ring safety valve 1set    

 

BZ&EZ Series Armoured cable cutting tools with battery powered for cutting Cu/Al and armoured cable, which need charging time for 2hours

The hydraulic unit incorporates an automatic retraction which returns the piston into its starting position when the maximum operating pressure is reached.

A manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp. The unit is equipped with a special brake when stops the forward motion of the piston & die when the trigger is released.

The unit is equipped with a double piston pump which is characterized by a rapid approach of the dies forwards the connector and a slow crimping motion.

The crimping head can be smoothly turned by 350° around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.

Li-ion batteries do neither have a memory effect nor self discharge. Even after long periods of no operation, the tool is always ready to operate. In addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles compare to NiMH batteries.

A Temperature sensor makes the tool stop working automatically when the temperature over 60℃ under long time working, the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal.


Previous: 
Next: 

Related Products